FEA, THAT NEEDS TO UNDERSTAND...

Hey Guys, We are going to dive a little more into the meshing. Bcoz this is a very important topic that needs to discuss with. When we are doing mesh on geometry. There are various types of bodies on them we need to do the mesh. In which it is having some critical areas where there is more stress concentration occurs. So we need some dense type of mesh over there.  Firstly let's talk about what is mesh density? It is nothing but the number of elements per unit area. As we know, if the density of mesh increases the computation time will go high.  So, here as we have discussed the meshing elements we know that the quad element has better accuracy than tria so here I have found this image in which it has the increasing elements on the same geometry. So, here you can see that as the number of elements increases near the hole. So now what we are getting through this. The geometry has a dimension of 1000*1000mm and a thickness of 10mm. We are going to pull it from the right side wit...

  Hello Guys, In the previous one we have discussed mainly, the types of meshing in today's blog we will understand how to mesh and what should be done while meshing to improve the quality of the mesh and have an accurate result... so let's go There are various points that should one remember while carrying meshing which we are going to discuss... 1. Spend sufficient time studying geometry:  For carrying out the meshing in a good way we have to study geometry properly. Most of the time it is observed that most of the CAE engineers directly do to meshing job. That's the biggest mistake I have done in the past when I directly go with the meshing. Here is an imp step to understand the curvatures and other things of the geometry by which we can apply the options like proximity and curvature and also we can decide the element types by which. 2. Time: Nowadays it is very important to look at the clock. because it is very important according to the boss's and client's poin...